Skip to main content

Liftnose

Lift-Nose Reject The Liftnose reject is best used with discreet products relatively low in height.…
Ahn
August 25, 2022

No Reject

No Reject Where end users would like to handle the rejection themselves, the inspection system…
Ahn
August 25, 2022

Reverse

Reversing Reject Effective for bulk flow product applications, the Reversing reject comprises an inspection belt…
Ahn
August 22, 2022

Retracting Nose

Retracting Belt reject Upon detection of a defective product, the exit roller will retract, exposing…
Ahn
August 20, 2022

Overhead Sweep

Overhead Sweep reject The Overhead Sweep reject uses a paddle located above the products conveyed…
Ahn
August 19, 2022

Bi-directional Sweep

Bi-directional Sweep Reject The Bi-directional Sweeper reject uses a paddle positioned over the width of…
Ahn
August 17, 2022

Heavy-duty Kicker

Heavy-duty Kicker Reject A step up from the Kicker reject device, the Heavy-Duty Kicker is…
Ahn
August 15, 2022

Kicker

Kicker Reject Best suited for medium to large products such as bulk bags or boxes,…
Ahn
August 14, 2022

Flap Gate

Flap Gate Reject The Flap Gate reject uses a flap that, upon detection, pivots outward,…
Ahn
August 10, 2022

Dropnose

Drop-nose Reject As a product moves over the Dropnose section of the conveyor, the belt…
Ahn
August 6, 2022

Diverter

Diverter Reject Upon detection, the Diverter reject device actuates a paddle to redirect product flow…
Ahn
August 4, 2022

Belt Stop Alarm

Belt Stop Alarm reject Suitable for any product where automatic reject is not necessary, but…
Ahn
August 2, 2022

Air Blast

Air Blast reject Located on the conveyor opposite the reject area, the Air Blast reject…
Ahn
August 1, 2022